Angola Motor Speedway

Miller_Racing · Joined: 10 Oct 2007 Posts: 34 Location: Fort Wayne, IN

Miller Racing Team is selling out of the Mini-Stock Class.

#25 Mini-Stock

-Car has a 2.3L 4-Cylinder Motor, 504 Hyrolic cam decked 100 thousands, Block is bored 40 over with Keith Black Racing Pistons and stock 2.3 rods, Stock Crank with ARP Rod Bolts, Stock Oil Pump, Racing springs And Wheels, Fuel Cell, Seat, window Net and Seat Belts. Spare Rims and Tires. $3,000

#65 Mini Stock

-Car has a 2.3L 4-Cylinder Motor, 580 Roller cam decked 100 thousands with Over-sized Valves, Block is bored 40 over with Kieth Black Racing Pistons and stock 2.3 rods, Stock Crank with ARP Rod Bolts, High Volume Oil Pump, Racing springs And Wheels, Fuel Cell, Seat with Head restraint, window Net and Seat Belts. Spare Rims and Tires. THis car has won an A-main at Agnola in 2005 (old number 85) and has Won heat races at 4 Different Tracks. Never has Finished worst than 6th in points at Baer Field Speedway in the past 4 years. $6,500

5 STOCK 4- CYLINDER FORD MUSTANG D-PORT HEADS $50 each

6 VALVE COVERS $10 each

3 Mini-Stock 6" wide 4" offset rims Used but in great Condition $35 of one $ 75 for all 3

3 Stock exhaust Manifolds $35 each

Mini-Stock Five-Star Racing Lightweight Clutch Excellent Condition Ran only 1 year $750 New asking $400

Many Mini-Stock Body Parts- Fenders, Nose peices, and a few hoods- Call for details

2 Stock 2.3 Blocks, Need machined and cleaned, Call for details

Contact Any of the Miller Racing Team
Russ Miller 260-459-8475
Dean Miller 260-747-4122
Mike Miller 260-418-2162

rookie66 · Joined: 10 Oct 2007 Posts: 188

are the rims chrome?

Miller_Racing · Joined: 10 Oct 2007 Posts: 34 Location: Fort Wayne, IN

No, All of our rims are the Black standard rims that we Painted Chrome. They look great on the cars.

rookie66 · Joined: 10 Oct 2007 Posts: 188

asre you guys going to be at the swap meet at Kruse sunday?

Miller_Racing · Joined: 10 Oct 2007 Posts: 34 Location: Fort Wayne, IN

No, Miller Racing will not be at Shermans Show this Sunday. If anyone is interested in looking at our items you can call one of us and we will gladly give you directions to our Shop in Downtown Fort Wayne and Give you a chance to look at any items you are interested in.

toml · Joined: 08 Oct 2007 Posts: 3 Location: Fort Wayne In.

Russ or Mike do you have any motorcraft carbs that have 1.33 encircled on the left side of the float bowl? Thank's Mini Stock #18

Miller_Racing · Joined: 10 Oct 2007 Posts: 34 Location: Fort Wayne, IN

Tom, We do have three Complete Carbs but I have no clue if they are what you're looking for. You're more than welcome to check them out. Just give one of us a call and we can give you directions to our shop. then you can check them out. Thanks

Miller_Racing · Joined: 10 Oct 2007 Posts: 34 Location: Fort Wayne, IN

Price Reduction on all Parts. There are too many parts to list on here. I will be posting a list of parts on our new website in a day or too. WE NEED TO GET RID OF THESE PARTS. Basically if you need it and we have make an offer and if it sounds good enough it'll be yours. We have everything From Complete cars, to Parts cars, to Engine parts, Drive line parts, Rims and Tires, Rearends, axels, Carbs, Doors, Hoods, Nose peices, Front and rear Bumper covers. List will be on http://miller-racing-team.tripod.com
Look under the for sale link.

Miller_Racing · Joined: 10 Oct 2007 Posts: 34 Location: Fort Wayne, IN

UPDATE 3-6-07
EVERYTHING MUST GO!!!!!!!!!
#25 Mini-Stock -Car has a 2.3L 4-Cylinder Motor, 504 Hyrolic cam decked 100 thousands, Block is bored 40 over with Keith Black Racing Pistons and stock 2.3 rods, Stock Crank with ARP Rod Bolts, Stock Oil Pump, Racing springs And Wheels, 11 gallon Fuel Cell, Seat, window Net and Seat Belts. Spare Rims and Tires.
$2,500 O.B.O.

#65 Mini Stock -Car has a 2.3L 4-Cylinder Motor, 580 Roller cam decked 100 thousands with Over-sized Valves, Block is bored 40 over with Kieth Black Racing Pistons and stock 2.3 rods, Stock Crank with ARP Rod Bolts, High Volume Oil Pump, Racing springs And Wheels, Fuel Cell, Seat with Head restraint, window Net and Seat Belts. Spare Rims and Tires. THis car has won an A-main at Agnola in 2005 (old number 85) and has Won heat races at 4 Different Tracks. Never has Finished worst than 6th in points at Baer Field Speedway in the past 4 years.
$6,000 O.B.O.

The old #85 Hatchback Mustang Russ Miller Drove from 2002 to 2006 (one A-main win at Agngola in 2005 & Ran as #19 two races in 2007) has been wrecked and needs repaired, Still has a Sherman Enterprises Roll cage, Front and rear hoops, 8 gallon fuel cell-
$500 O.B.O.

1991 For Mustang Parts Car, Gutted, comes with fully welded cage ready to be installed, Still has all windows and doors-
$350

Other Parts:
Drive Line Parts:
4 Clutch Plates - $5/ea: 2 Stock Flywheels - $5/ea: Stock Throw out bearing arm - $5: Stock Tranny Mount - $5: 2 Stock Great condition Throw out bearings - $5/ea: Complete lightened Stock Clutch assembly Needs new starter ring - $65: 2 Stock 4 speed Transmissions Both from 91 mustangs - $75/ea: 3 Steel Drive Shafts $20/ea

Motor: Bottom End
1 set Main caps Stock- $10: 17 Stock 2.3 connecting rods $2/ea: Bare 2.3L Stock Block $40: 4 Stock Starters Condition not known - $20 for all: 2 Stock Water pumps just need cleaned - $15/ea: 2 Auxillary Camshafts - $10/ea: 3 Stock Fuel Pumps Still working great - $10/ea: 3 Bell housings - $10/ea: 2 Complete 2.3L Stock Lowerends, needs machined and cleaned - $50/ea: 2 Splatter Plates - $5/ea:

Motor: Top End
One barrel Carb $5: 8 two barrel Carbs & Parts (all in misc parts and conditions) $15/ea: Accelerator Cable $5: 7 Stock Heads $40/ea: Stock Cam Excellent Condition $10: 2.5" Exhaust Header $35: 4 Exhaust Manifolds $15/ea: 2 fuel intected intakes $10/ea: 2 stock distributors $10/ea: Stock cylinoid $10: 5 Water Pump pulleys $5/ea: 5 Crank Pulleys $5/ea: Stock cam Pulley $5:

Body Panels
Stock Mustang GT nose Piece $25: Aftermarket GT Nose piece (1 left 2 rights) $50 for all 3 pieces: Mustang GT Rear Bumper Cover $10: Mustang GT side skirts (under the door only) $10: 5 Stock nose pieces Various designs $10/ea: 2 hoods $10/ea: 3 Front Fenders Used condition $40 for all: 3 Notchback Trunk lids $5/ea: 5 doors from like new to race used $10/ea: 3 Stock Rear Bumper Covers $5/ea

Chasis Parts
2 Rack & Pinions $30/ea: 3 Brake Calipers $15 for all 3: 2 brake rotors $10 for both: Brand New Passenger side Spindal $5: Rearend Needs Locked 308 Gear $30: Rearend Needs Locked 350 Gear $30: Rearend Needs Locked 383 Gear $30: 5 rearend axels $10 for all: 3 Bare 6" wide 4"offset 14" mini Stock Rims Painted Chrome $30/ea: 9 6" wide 14" Rims 1", 2", & 4" offsets with good tires mounted $40/ea

Special Offer.......
Come Take EVERYTHING listed Here from us for only $10,000

CONTACTS:
Russ Miller 260-459-8475
Dean Miller 260-747-4122
Mike Miller 260-418-2162

N9rracing · Joined: 15 Jan 2008 Posts: 7

Hey guys, what all is wrecked on Russ's old car? Are the transmissions the German models with the sheet metal cover on the top? Thanks

Miller_Racing · Joined: 10 Oct 2007 Posts: 34 Location: Fort Wayne, IN

Transmissions I believe they are German, As for the ol 85 car, Hit the wall with the right front real bad. Pushed the right front back about 4 inches, buckeled the floorboard, and may have bent the front clip, Not sure though. We have been told it is fixable. If you'd like to see it give me a call. Russ

Miller_Racing · Joined: 10 Oct 2007 Posts: 34 Location: Fort Wayne, IN

I HVE PICTURES OF ALL OF THESE PARTS CAN E-MAIL PICTURES. ALL YOU HAVE TO DO IS ASK.

DFR18 · Joined: 04 Nov 2007 Posts: 39

I was curious if you could send pictures of the fenders, as well as the racks you have. Email address is below. Thanks!

Derek Davis
davis-18@hotmail.com
davisfamilyracing.com

Miller_Racing · Joined: 10 Oct 2007 Posts: 34 Location: Fort Wayne, IN

Will do , It will be later tonight as all pictures are on my pc. I do not have any pictures of the Steering racks as I didn't have lots of time when taking these photos. I couldn't get to them. I will try to get pics of them this weekend.

N9rracing · Joined: 15 Jan 2008 Posts: 7

Hey, could you guys send me some pictures of the transmissions and the header? Thanks. jake09@n9rracing.com